1 | reversibility with full flow | | | | | | | 6 | 0.86% |
2 | made of stress relieved | | | | | | | 6 | 0.86% |
3 | is easily set using | | | | | | | 6 | 0.86% |
4 | for trouble free service | | | | | | | 6 | 0.86% |
5 | alloy for trouble free | | | | | | | 6 | 0.86% |
6 | aluminum alloy for trouble | | | | | | | 6 | 0.86% |
7 | pitch is easily set | | | | | | | 6 | 0.86% |
8 | blade pitch is easily | | | | | | | 6 | 0.86% |
9 | permanent mold cast aluminum | | | | | | | 6 | 0.86% |
10 | kiln environments to 350°f | | | | | | | 6 | 0.86% |
11 | easily set using the | | | | | | | 6 | 0.86% |
12 | are made of stress | | | | | | | 6 | 0.86% |
13 | they are made of | | | | | | | 6 | 0.86% |
14 | keyed taper lock bushings | | | | | | | 6 | 0.86% |
15 | with full flow in | | | | | | | 6 | 0.86% |
16 | full flow in both | | | | | | | 6 | 0.86% |
17 | directions all smithco propellers | | | | | | | 6 | 0.86% |
18 | both directions all smithco | | | | | | | 6 | 0.86% |
19 | rugged kiln environments to | | | | | | | 5 | 0.71% |
20 | steel hardware and the | | | | | | | 5 | 0.71% |
21 | environments to 350°f 175°c | | | | | | | 5 | 0.71% |
22 | have adjustable pitch blades | | | | | | | 5 | 0.71% |
23 | the blade pitch is | | | | | | | 5 | 0.71% |
24 | taper lock bushings and | | | | | | | 5 | 0.71% |
25 | pitch blades and tested | | | | | | | 5 | 0.71% |
26 | stainless steel hardware and | | | | | | | 5 | 0.71% |
27 | free service in rugged | | | | | | | 5 | 0.71% |
28 | in both directions all | | | | | | | 5 | 0.71% |
29 | flow in both directions | | | | | | | 5 | 0.71% |
30 | trouble free service in | | | | | | | 5 | 0.71% |
31 | cast aluminum alloy for | | | | | | | 5 | 0.71% |
32 | mold cast aluminum alloy | | | | | | | 5 | 0.71% |
33 | grade permanent mold cast | | | | | | | 5 | 0.71% |
34 | wall and the maximum | | | | | | | 5 | 0.71% |
35 | stress relieved heattreated high | | | | | | | 5 | 0.71% |
36 | of stress relieved heattreated | | | | | | | 5 | 0.71% |
37 | of static pressure as | | | | | | | 4 | 0.57% |
38 | and the maximum recommended | | | | | | | 4 | 0.57% |
39 | fan wall and the | | | | | | | 4 | 0.57% |
40 | kilns fan wall and | | | | | | | 4 | 0.57% |