CONCRETETAC.COM KEYWORD DENSITY CHECKER

Total words: 7104 | 2-word phrases: 1770 | 3-word phrases: 2221 | 4-word phrases: 2378

PAGE INFO

Title Try to keep the title under 60 characters (4 characters)
CTAC
Description Try to keep the meta description between 50 - 160 characters (125 characters)
The Concrete Testing Adherence Program (CTAC) was developed to create fair and consistent assessment of ready mixed concrete.
Keywords Meta keywords are not recommended anymore (0 characters)
H1 No H1 tag on the page (0 characters)

ONE WORD PHRASES 735 Words

# Keyword H1 Title Des Volume Position Suggest Frequency Density
1the23932.52%
2of8912.11%
3and729.80%
4be598.03%
5to587.89%
6a587.89%
7concrete537.21%
8shall395.31%
9in385.17%
10×354.76%

TWO WORD PHRASES 1770 Words

# Keyword H1 Title Des Volume Position Suggest Frequency Density
1of the382.15%
2shall be351.98%
3in a170.96%
4in the140.79%
5× astm140.79%
6with a140.79%
7the temperature130.73%
8to the130.73%
9from the120.68%
10on a120.68%
11with the120.68%
12× csa110.62%
13each layer100.56%
14to be100.56%
15and a100.56%
16concrete test90.51%
17mixed concrete90.51%
18a minimum90.51%
19initial curing80.45%
20freshly mixed80.45%

THREE WORD PHRASES 2221 Words

# Keyword H1 Title Des Volume Position Suggest Frequency Density
1sample shall be80.36%
2are to be70.32%
3sides of the70.32%
4temperature measuring device60.27%
5× astm c17260.27%
6a minimum of60.27%
7astm c172 section60.27%
8freshly mixed concrete60.27%
9the temperature measuring60.27%
10the measuring bowl50.23%
11rod each layer50.23%
12specimens shall be50.23%
13the initial curing40.18%
14the surface and40.18%
15times with the40.18%
16of freshly mixed40.18%
17the sample shall40.18%
18concrete by the40.18%
19the sides of40.18%
20concrete testing adherence40.18%
21of the batch40.18%
22of the measure40.18%
23the tamping rod40.18%
24of the maximum30.14%
25150 mm ×30.14%
2615 times with30.14%
27to 15 times30.14%
28during initial curing30.14%
2910 to 1530.14%
30placed on a30.14%

FOUR WORD PHRASES 2378 Words

# Keyword H1 Title Des Volume Position Suggest Frequency Density
1× astm c172 section60.25%
2the temperature measuring device50.21%
3the sample shall be40.17%
4the sides of the40.17%
5each layer 25 times30.13%
6of the measuring bowl30.13%
715 times with the30.13%
8to 15 times with30.13%
910 to 15 times30.13%
10sample shall be obtained30.13%
11test specimens shall be30.13%
12be cast a minimum30.13%
13tap the sides of30.13%
14after each layer is30.13%
15the measure to cover30.13%
16the maximum and minimum30.13%
17rod each layer 2530.13%
18maximum and minimum temperature30.13%
19a minimum of 230.13%
20remixed with a shovel30.13%
21of the maximum and30.13%
22by the pressure method20.08%
23times with the mallet…20.08%
24sample shall be taken20.08%
25shall be taken between20.08%
26the 10 and 9020.08%
27curing period shall be20.08%
28initial curing period shall20.08%
29taken between the 1020.08%
30between the 10 and20.08%
31and 90 points of20.08%
3210 and 90 points20.08%
33concrete by the pressure20.08%
34be taken between the20.08%
35advance it with a20.08%
36minimum of 28 l20.08%
37is found to be20.08%
38and remixed with a20.08%
39combined and remixed with20.08%
40with a sawing motion20.08%

EXTERNAL LINKS

# URL Whois Check